SIMPLY STEP FOR FREE CHANNELS
              

If u succeed with this SIMPLY GENERAL STEP, then use the same knowledge for tha ADVANVED STEPS Menu-advanced settings-then input 9949 as the code Leave tha home network, set network 2 and select Dstv W7 and input 12437as frequency and 23437 as symbol rate and pole = horizontal. Accept tha settings and scan all tha networksks . You will find channels by pressing TV on yo remote. And selecting PUBLIC W7. For yo HITV: Go to menu installation >> password=0000>>TP set up Click right and choose between newsat 1-25 to 35 click on it and click left. Scroll down to TP and move right again. Then insert 11785h27500 to get free channels..

   THESE STEPS ARE ONLY FOR ADVANCED USERS
Settings for DSTV Multichoice The following settings are very easy to configure and work on all decoders. Step 1: On the remote press menu, then choose 'Advanced options' then choose 'Dish installation' Step 2: the pin code is 9949 Step 3: You will notice a screen that has Network 1, Network 2, Network 3, More Networks. NB: Ignore Network 1, it is for all the channels you currently have. Step 4: From Network 2 & onwards Enter the following Information: NB: The Satellite name you create for ALL is DSTV PAS7
Step 1: Before setting up your decoder, please ensure that your decoder software is upgraded to the latest version. To perform a software upgrade: Press the MENU button. Select "ADVANCED OPTIONS" and press OK. Select "DSD UPGRADE" and press OK. The decoder should start to upgrade the software now. If you are not sure about the version of your decoder software, you can contact Multichoice or your local DSTV technician/supplier and they will be able to help you.

Step 2: Press menu Select "Advanced Options" Select "Dish Installation" Enter the pin "9949" Select "Network Configuration" Select "Network 2 Setup" NB: Leave "Network 1 Setup (Home)" unchanged!! Set Signal Setup to "Enabled" by selecting it, and moving left or right Set Frequency to "11170" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "5/6" Select "Accept these settings"



Step 3: Select "Network 3 Setup" Set Signal Setup to "Enabled" Set Frequency to "11625" Set Symbol Rate to "15000 Set Polarization to "Vertical" Set FEC to "3/4" Select "Accept these settings"

Step 4: Select "Network 4 Setup" Set Signal Setup to "Enabled" Set Frequency to "11674" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "5/6" Select "Accept these settings"

Step 5: Select "Network 5 Setup" Set Signal Setup to "Enabled" Set Frequency to "12522" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"

Step 6: Select "Network 6 Setup" Set Signal Setup to "Enabled" Set Frequency to "12562" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"

Step 7: Select "Network 7 Setup" Set Signal Setup to "Enabled" Set Frequency to "12682" Set Symbol Rate to "26657 Set Polarization to "Horizontal" Set FEC to "1/2" Select "Accept these settings"

Step 8: (U can skip this step if u get issues) Select "Network 8 Setup" Set Signal Setup to "Enabled" Set Frequency to "12684" Set Symbol Rate to "26652 Set Polarization to "Vertical" Set FEC to "1/2" Select " Accept these settings"

Step 9: Select "Network 8 Setup" Set Signal Setup to "Enabled" Set Frequency to "12722" Set Symbol Rate to "26657 Set Polarization to "Vertical" Set FEC to "1/2" Select "Accept these settings"

Step 10: Exit once to go back to the "Dish Installation" menu Select "Scan All Networks" Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected! Once completed, your picture will return as normal

To access you public channels, press the "TV button" on your remote control. The "Bouquet Options" menu will appear. Select "Public PAS7/10" Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the "music note" on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen . . . . FREE DSTV INTERNET

The best free internet presently is dstv internet. You can make use of this free internet with dstv by the use of a cable modem and decoder.

Internet used this way doesnt affect the use of the decoder in watching dstv with your tv.

Its a simple procedure.

Tools needed:

A decoder (dstv, hitv) A cable modem Lan cables A router ( for more than one pc) Network configuration knowledge

STEPS: Connect the cable modem (with the splitter) to the co-axial port of your decoder Connect the RJ45 cable to the LAN port of your system Turn on the whole system Open your LAN and configure with 127.0.0.1 port: 8080 Then start your free internet.